Friday, January 29, 2010

#016 04 Tybee Pier - Need a Lift?

 

I left the office a bit early today since I have to work on Sunday and I stopped by the old train store.  Everyone else was out buying milk and bread for the ice storm of the century.  Yeah, right.  Today I purchased some Kadee 33" steel wheelsets for some cars I want to work on.

I also bought a pile of used Railroad Model Craftsmen and a Wayne Wesolowski book to read the week after next when I'm laid up recovering from a vasectomy.  What fun.  I told my wife not to take it out of my train budget but to charge it against medical.  Smart me!


Repair time!  Time to fix the section that my daughter knocked down so that I can start laying track tomorrow.


First I mark where the foam isn't so that I don't put glue where it is not needed.  The handy kerosene heater in the back knocks the chill off pretty well when the ice starts to fall.


I double check the surface for smoothness and then add a bead of glue around the web.


The guilty party is glued to the chair and not allowed to move while the repairs are done.  I'm out of duct tape or we'd be using that around the always-running motor mouth.  Why, why, why, why, why, daddy!


There!  Glued and stable.  Ok, maybe not so stable.


This area was lifting up, so I clamped her down.


I re-glued all of the uprights and will screw them in tomorrow when the glue dries.


My wife takes pictures while I repair the broken foam section that was knocked out from the fall.  Daughter got loose and I panic.


I don't see her so I figure she went upstairs.  I carefully glue the broken piece back in place.


Now let's test fit the pier into its home.  Nice fit and it really looks good.


Not bad for an old fat guy!


We'll let the section dry and start on another project.  I want to put this hoist assembly on the dock.  Let's study the parts and see if it can be used.  The piece was set on the pier and it fits nicely.


The base is really nice.  I don't know what kit this came from but it is perfect for hauling cotton.


Before I get too far I take out the handy notebook and a handful of Sharpee pens and quickly sketch the derrick and its three cables.  One rotates the boom.  The other raises and lowers the boom and the third raises and lowers the hook.  There are tie downs to anchor the top to keep it stable (guylines).  Always make notes when you disassemble things, and don't forget to photograph it as well.


Meanwhile the Popsicle Bandit practices making models beside me.  She is taking after some of the guys in the NCI group that she adores.  She has glue everywhere (Bob), Popsicle sticks glued to the table (Rick) and keeps spilling stuff on the floor (Ken).  At least it is not tie stain.


After careful consideration I've decided that the metal hoist operator shack has got to be replaced with a wooden one.  It is just too modern and already assembled, so I'll throw it in the salvage parts box and scratchbuild one.  I'm in need of a pile of Grandt Line windows and doors, so I'll add that to my shopping list for the show coming up.


The more I play with this the less I like it.  It is VERY tall and a bit unruly.  My guess is that every time I move the layout I'll be unscrambling cables.  I'll set it aside and pray about it for a while.  Maybe I'll not use it.



2 comments:

  1. Wouldn't most of the cotton loading/unloading have been done by hand anyway? To be completely accurate, you're likely going to have to model an ugly part of Southern history...

    ReplyDelete
  2. Don't know what you're thinking in the way of boats, but here's a neat one that plied the Coosa River:

    http://www.riverboatdaves.com/pics/Ken_McCulloch/Coosa_%20R/c_gadsden.html

    Not too elaborate and the right size for a model too!

    ReplyDelete